Resources
Engineering insights from the field
“Practical knowledge on measurement, monitoring, and testing — from the engineers who do the work.”
Technical articles, application notes, case studies, and white papers from the ITM team — across all three pillars.
Browse by resource pillar
Engineering
Testing, RLDA, rugged systems, and measurement software.
Instrumentation
Strain gauging, sensing, DAQ, harnesses, and wireless networks.
Edge Solutions
Industrial monitoring, Edge Nodes, dashboards, and the platform.
Recent insights
-
ITM’s Patented Technologies Prevent Boiler Tube Leaks
The US patent office has recently awarded patents to ITM for (2) two of the underlying boiler safety and process optimization technologies embedded within our CDS and SHOP systems. These systems monitor boiler conditions and alert operators when boiler tube damaging events/conditions occur. Clinker Detection System (CDS) – US Patent 10060688B2 The Clinker Detection System…
-
ITM adds NI-9242 compatibility to iTestSystem
The NI-9242 single ended voltage input module can now be used with the latest version of iTestSystem (16.1). The NI-9242 C-Series module features three (3) voltage inputs plus one (1) neutral input, 24-bit resolution, 250V rms L-N, 400V rms L-L, and 50 kS/s/ch. The measurement range (250V rms L-N or 400V rms L-L) makes it…
-
ITM adds NI-9246 compatibility to iTestSystem
In the latest release of iTestSystem (v 16.1), we are adding the NI-9246 current input module to the compatibility list. The NI-9246 features 3, 22 Arms continuous current inputs, 24-bit resolution, and 50 kS/s/ch in the C Series form factor. The measurement range (22 Arms) makes it ideal for three phase current measurements from 1A…
-
ITM Live Demo Series: Sound Level Measurements with iTestSystem
The latest video in the ITM Live Demo series shows the new sound level measurement capability of iTestSystem. In recent months, our customers have asked us to integrate sound level measurements into iTestSystem. With this new feature, iTestSystem can help you monitor construction site noise or measure whether your equipment meets ISO noise emission standards…
-
ITM Live Demo Series: iTestSystem with NI FieldDAQ
As a part the ITM Live Demo series, we’re excited to release this video featuring iTestSystem and National Instruments FieldDAQ™ hardware to assist with your data collection projects. At ITM, we’re always on the lookout for tools that will help us take tough measurements. When we heard that NI was introducing a new device that…
-
iTestSystem Tip: Start and Stop Tests with MultiDAQ Trigger
When deploying a DAQ system for unattended testing, use the MultiDAQ trigger function in iTestSystem to automate data collection. Data collection starts when the start trigger condition is met. Data collection stops when the stop trigger condition is met. Follow the steps below to enable and configure triggering. Deploying a DAQ system for unattended testing?…
Have a measurement challenge? Talk to the engineers behind these articles.